Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img MAX1448EHJ+ datasheet by Maxim Integrated Products

    • 10-Bit, 80Msps, Single 3.0V, Low-Power ADC with Internal Reference
    • Original
    • Yes
    • Yes
    • Transferred
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    MAX1448EHJ+ datasheet preview

    MAX1448EHJ+ Frequently Asked Questions (FAQs)

    • The recommended PCB layout for the MAX1448EHJ+ is to keep the input and output traces as short as possible, and to use a solid ground plane to reduce noise and EMI. Additionally, it's recommended to place a 10nF capacitor between the VCC and GND pins to filter out noise.
    • To ensure the MAX1448EHJ+ is properly powered up and initialized, make sure to follow the power-up sequence specified in the datasheet. Apply VCC first, followed by the input signal. Also, ensure that the input signal is within the specified range and that the device is properly bypassed with capacitors.
    • The maximum operating temperature range for the MAX1448EHJ+ is -40°C to +125°C. However, it's recommended to operate the device within the -20°C to +85°C range for optimal performance and reliability.
    • To troubleshoot issues with the MAX1448EHJ+, start by checking the power supply and input signal for any anomalies. Use an oscilloscope to verify the input and output waveforms, and check for any signs of overheating or physical damage to the device. Consult the datasheet and application notes for troubleshooting guidelines and common pitfalls to avoid.
    • Yes, the MAX1448EHJ+ is suitable for use in high-reliability and safety-critical applications. However, it's essential to follow proper design and testing procedures to ensure the device meets the required safety and reliability standards. Consult the datasheet and relevant industry standards for guidance.
    Supplyframe Tracking Pixel