The recommended PCB layout for the MAX1518BETJ+ is to use a 4-layer board with a solid ground plane, and to keep the input and output traces as short as possible. Additionally, it's recommended to use a common-mode filter capacitor between the input and output pins to reduce EMI.
To ensure stability, make sure to follow the recommended component values and layout guidelines in the datasheet. Additionally, use a low-ESR output capacitor and a high-quality input capacitor, and avoid using long input and output traces. If oscillation occurs, try adding a small capacitor (e.g. 10nF) between the output pin and ground.
The MAX1518BETJ+ can handle input voltages up to 30V, but it's recommended to keep the input voltage below 24V to ensure reliable operation and to prevent damage to the device.
The MAX1518BETJ+ is rated for operation up to 125°C, but it's recommended to derate the output current and input voltage at high temperatures to ensure reliable operation. Consult the datasheet for specific derating guidelines.
To troubleshoot issues with the MAX1518BETJ+, start by checking the input voltage, output voltage, and output current. Use an oscilloscope to check for oscillations or noise on the output. Check the PCB layout and component values to ensure they match the recommended values in the datasheet. If the issue persists, consult the datasheet and application notes for further guidance.
MAX1518BETJ+ datasheet
by Maxim Integrated Products
Findchips
