The recommended PCB layout for the MAX1726EUK18+T involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a separate power plane for the input voltage and to keep the output voltage traces away from the input voltage traces to minimize noise coupling.
The selection of input and output capacitors for the MAX1726EUK18+T depends on the specific application requirements. In general, it's recommended to use low-ESR capacitors with a capacitance value of 10uF to 22uF for the input capacitor and 22uF to 47uF for the output capacitor. The capacitor voltage rating should be at least 1.5 times the maximum input voltage.
The MAX1726EUK18+T has an operating ambient temperature range of -40°C to +125°C. However, the device's performance and reliability may be affected at extreme temperatures, so it's recommended to operate the device within a temperature range of -20°C to +85°C for optimal performance.
To ensure proper power-up and power-down of the MAX1726EUK18+T, it's recommended to follow a soft-start sequence, where the input voltage is ramped up slowly to the nominal value. During power-down, the input voltage should be ramped down slowly to prevent any voltage spikes or oscillations.
The recommended input voltage range for the MAX1726EUK18+T is 2.7V to 5.5V. Operating the device outside of this range may affect its performance and reliability.
MAX1726EUK18+T datasheet
by Maxim Integrated Products
Findchips
