The recommended PCB layout for the MAX2472EUT-T is to keep the input and output traces as short as possible, and to use a solid ground plane to reduce EMI. Additionally, it's recommended to place a 10nF capacitor between the VCC and GND pins to filter out noise.
To ensure the MAX2472EUT-T is properly powered up, make sure to connect the VCC pin to a stable 3.3V or 5V power supply, and the GND pin to a solid ground. Also, ensure that the power supply is clean and free of noise, and that the device is properly decoupled with capacitors.
The MAX2472EUT-T can support data rates up to 100Mbps, making it suitable for high-speed applications such as USB, Ethernet, and HDMI.
The MAX2472EUT-T can be configured for different operating modes by setting the MODE pin high or low. For example, setting the MODE pin high enables the device's high-speed mode, while setting it low enables the low-power mode. Refer to the datasheet for specific configuration details.
The typical power consumption of the MAX2472EUT-T is around 150mW when operating at 3.3V and 100Mbps. However, this can vary depending on the specific application and operating conditions.
Findchips
Findchips