The recommended PCB layout for the MAX3098EACSE+T involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the signal source. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and EMI.
The MAX3098EACSE+T requires a single 3.3V or 5V power supply, and it's recommended to use a low-dropout linear regulator (LDO) to power the device. The power sequencing requirements involve powering up the device after the input signals are stable, and powering down the device before the input signals are removed.
The MAX3098EACSE+T can support data rates up to 100Mbps, making it suitable for high-speed applications such as USB, SATA, and PCIe.
The MAX3098EACSE+T can be configured for different input signal types by connecting the input pins accordingly. For single-ended inputs, connect the input signal to the IN+ pin and the IN- pin to ground. For differential inputs, connect the positive input signal to the IN+ pin and the negative input signal to the IN- pin.
The typical propagation delay of the MAX3098EACSE+T is around 10ns, which is relatively low compared to other signal repeaters. This low propagation delay ensures that the device does not introduce significant latency in the system, making it suitable for high-speed applications.
MAX3098EACSE+T datasheet
by Maxim Integrated Products
