The recommended PCB layout for the MAX3110ECWI+G36 involves placing the device near the edge of the board, with the input pins facing the signal source. A ground plane is recommended under the device to reduce noise. Additionally, the input traces should be kept short and shielded to minimize noise pickup.
To ensure the MAX3110ECWI+G36 is properly powered, connect the VCC pin to a clean, regulated 3.3V or 5V power supply. Decouple the power supply with a 0.1uF capacitor to reduce noise. Additionally, ensure the power supply can provide the required current, which is typically 10mA for the MAX3110ECWI+G36.
The MAX3110ECWI+G36 supports data rates up to 100Mbps, making it suitable for high-speed applications such as USB, SATA, and PCIe.
The MAX3110ECWI+G36 can be configured for differential or single-ended operation by connecting the appropriate pins. For differential operation, connect the IN+ and IN- pins to the differential signal source. For single-ended operation, connect the IN+ pin to the signal source and the IN- pin to ground.
The typical power consumption of the MAX3110ECWI+G36 is 10mA at 3.3V or 5V, making it suitable for power-sensitive applications.
MAX3110ECWI+G36 datasheet
by Maxim Integrated Products
