The recommended layout and routing for the MAX3160EEAP-T can be found in the Maxim Integrated Products application note AN4341, which provides guidelines for PCB layout, component placement, and routing to ensure optimal performance and minimize noise.
The MAX3160EEAP-T has a thermal pad on the bottom of the package, which should be connected to a thermal plane on the PCB to dissipate heat. A thermal via array or a copper pour can be used to connect the thermal pad to the thermal plane. Additionally, the device should be placed in a location with good airflow to help dissipate heat.
The recommended input capacitor value for the MAX3160EEAP-T is 10uF to 22uF, with a voltage rating of at least 6.3V. The input capacitor should be placed as close as possible to the VIN pin of the device to minimize noise and ensure stable operation.
The MAX3160EEAP-T output voltage can be configured by connecting resistors R1 and R2 between the FB pin and the output voltage. The output voltage can be calculated using the formula VOUT = 0.8V x (1 + R2/R1). The resistors should be chosen to ensure that the output voltage is within the specified range of 0.8V to 5.5V.
The maximum input voltage that the MAX3160EEAP-T can handle is 6.5V. Exceeding this voltage may damage the device or affect its performance. It is recommended to add input voltage protection, such as a voltage regulator or a transient voltage suppressor, to ensure that the input voltage remains within the specified range.
MAX3160EEAP-T datasheet
by Maxim Integrated Products
