The MAX3221EAE+ can support data rates up to 1 Mbps.
Yes, the MAX3221EAE+ can be used in a multi-point configuration, but it is not recommended as it may cause data corruption and errors.
To ensure proper termination, a 1 kΩ resistor should be connected between the RIN and GND pins, and a 1 kΩ resistor should be connected between the TOUT and GND pins.
The recommended power-up sequence is to apply VCC first, followed by VREF, and then enable the transmitter.
Yes, the MAX3221EAE+ can be used in a half-duplex configuration by connecting the transmitter output to the receiver input.