MAX410ESA+ datasheet by Maxim Integrated Products

MAX410ESA+ Frequently Asked Questions (FAQs)

• What is the maximum power dissipation of the MAX410ESA+?
  The maximum power dissipation of the MAX410ESA+ is 1.4W, which is calculated based on the maximum junction temperature (TJ) of 150°C and the thermal resistance (θJA) of 57.1°C/W.
• How do I ensure the stability of the MAX410ESA+?
  To ensure stability, it is recommended to use a minimum output capacitance of 10μF and a minimum ESR of 0.1Ω. Additionally, the input capacitor should be at least 1μF with an ESR of 0.1Ω or less.
• What is the recommended input voltage range for the MAX410ESA+?
  The recommended input voltage range for the MAX410ESA+ is 4.5V to 16V. Operating the device outside of this range may affect its performance and reliability.
• How do I calculate the output voltage of the MAX410ESA+?
  The output voltage of the MAX410ESA+ can be calculated using the formula: VOUT = (R1/R2) × (VIN - VREF), where R1 and R2 are the feedback resistors, VIN is the input voltage, and VREF is the reference voltage (typically 2.5V).
• What is the purpose of the EN (enable) pin on the MAX410ESA+?
  The EN pin is used to enable or disable the device. When the EN pin is pulled low, the device is in shutdown mode and consumes minimal power. When the EN pin is pulled high, the device is enabled and operates normally.