Maxim Integrated provides a recommended PCB layout in the application note AN1891, which includes guidelines for component placement, routing, and grounding to minimize noise and ensure optimal performance.
The output impedance of the MAX4164ESD+T can be calculated using the equation Zout = (Rout * Rload) / (Rout + Rload), where Rout is the output resistance of the op-amp and Rload is the load resistance. The output resistance of the MAX4164ESD+T is typically around 10 ohms.
The MAX4164ESD+T can drive capacitive loads up to 100nF without oscillation or instability. However, it's recommended to use a series resistor to limit the capacitive load and ensure stability.
To ensure that the MAX4164ESD+T is operating within its recommended operating conditions, verify that the supply voltage is within the range of 2.7V to 5.5V, the operating temperature is within the range of -40°C to +125°C, and the input common-mode voltage is within the range of VSS-0.5V to VDD+0.5V.
The typical settling time of the MAX4164ESD+T is around 1.5us to 0.1% of the final value, depending on the gain and bandwidth of the amplifier.
MAX4164ESD+T datasheet
by Maxim Integrated Products
Findchips
