Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img MAX487ECSA+T datasheet by Maxim Integrated Products

    • ±15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers
    • Original
    • Yes
    • Yes
    • Transferred
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    MAX487ECSA+T datasheet preview

    MAX487ECSA+T Frequently Asked Questions (FAQs)

    • The recommended operating voltage range for the MAX487ECSA+T is 4.5V to 5.5V.
    • To ensure reliable communication in noisy environments, use a common-mode choke or a ferrite bead in series with the RS-485 bus, and consider using a shielded cable to reduce electromagnetic interference (EMI).
    • The maximum cable length supported by the MAX487ECSA+T depends on the data rate and cable characteristics, but a general guideline is to limit the cable length to 4000 feet (1219 meters) at 10 Mbps.
    • The MAX487ECSA+T can be configured for half-duplex or full-duplex operation by connecting the DE (driver enable) pin to the RE (receiver enable) pin for half-duplex, or by connecting the DE pin to VCC and the RE pin to GND for full-duplex.
    • The thermal shutdown temperature of the MAX487ECSA+T is typically 150°C, at which point the device will shut down to prevent damage from overheating.
    Supplyframe Tracking Pixel