MAX526CCNG+ datasheet by Maxim Integrated Products

MAX526CCNG+ Frequently Asked Questions (FAQs)

• What is the recommended layout and routing for the MAX526CCNG+ to minimize noise and ensure optimal performance?
  To minimize noise and ensure optimal performance, it is recommended to follow a star-grounding scheme, keep analog and digital grounds separate, and use a solid ground plane. Additionally, keep the input and output traces short and away from each other, and use a low-ESR capacitor for decoupling.
• How do I ensure the MAX526CCNG+ is properly powered and what are the power sequencing requirements?
  The MAX526CCNG+ requires a single 2.7V to 5.5V power supply. Ensure that the power supply is clean and well-regulated. Power sequencing is not critical, but it is recommended to power up the device after the input signals are stable.
• What is the maximum capacitive load that the MAX526CCNG+ can drive?
  The MAX526CCNG+ can drive up to 100pF of capacitive load. However, it is recommended to keep the capacitive load as low as possible to ensure optimal performance and stability.
• How do I implement a voltage reference for the MAX526CCNG+?
  The MAX526CCNG+ has an internal voltage reference, but an external voltage reference can be used if desired. To implement an external voltage reference, connect the REF pin to a stable voltage source, such as a voltage regulator or a bandgap reference.
• What is the recommended operating temperature range for the MAX526CCNG+?
  The recommended operating temperature range for the MAX526CCNG+ is -40°C to +85°C. However, the device can operate up to +125°C with reduced performance and reliability.