The recommended PCB layout for the MAX5354EUA+ is to keep the analog and digital grounds separate, use a solid ground plane, and keep the input and output traces short and away from each other. Additionally, it's recommended to use a 0.1uF decoupling capacitor between the VCC and GND pins.
To ensure the MAX5354EUA+ operates within its specified temperature range, it's recommended to provide adequate heat sinking, use a thermal pad or heat sink on the package, and keep the ambient temperature within the specified range of -40°C to +125°C.
The maximum input voltage that can be applied to the MAX5354EUA+ is 6V, which is the absolute maximum rating. However, the recommended input voltage range is 2.7V to 5.5V for optimal performance.
The MAX5354EUA+ is a fixed-output voltage regulator, and the output voltage is set internally. However, the output voltage can be adjusted using an external resistor divider network connected to the FB pin. The datasheet provides a formula to calculate the required resistor values for a specific output voltage.
The typical dropout voltage of the MAX5354EUA+ is around 200mV at a load current of 1A. However, this value can vary depending on the input voltage, output voltage, and load current.
MAX5354EUA+ datasheet
by Maxim Integrated Products
Findchips
Findchips