The recommended PCB layout for the MAX5489ETE#TG16 is to keep the analog and digital grounds separate, use a solid ground plane, and keep the input and output traces short and away from noise sources. A 4-layer PCB with a dedicated analog ground plane is recommended.
To ensure the accuracy of the MAX5489ETE#TG16's output voltage, use a high-precision external reference voltage, keep the input voltage noise low, and use a low-ESR output capacitor. Additionally, ensure that the device is operated within its recommended operating conditions and that the output is not loaded excessively.
The maximum output current of the MAX5489ETE#TG16 is 10mA. However, it is recommended to limit the output current to 5mA or less to ensure stable operation and to prevent overheating.
To protect the MAX5489ETE#TG16 from overvoltage and undervoltage conditions, use a voltage supervisor or a reset IC to monitor the input voltage and reset the device if it falls outside the recommended operating range. Additionally, use a TVS diode or a zener diode to clamp the input voltage to a safe level.
The MAX5489ETE#TG16 is rated for operation up to 125°C. However, the device's accuracy and stability may be affected at high temperatures. It is recommended to derate the device's output current and to ensure that the device is properly heatsinked to prevent overheating.
MAX5489ETE#TG16 datasheet
by Maxim Integrated Products
Findchips
