A good PCB layout for the MAX6041AEUR+T involves keeping the input and output traces separate, using a solid ground plane, and placing the device close to the power source. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and ensure optimal performance.
The MAX6041AEUR+T requires a single 2.7V to 5.5V power supply. It's recommended to power the device with a clean, low-noise power source. The power sequencing requirements are not critical, but it's recommended to power the device after the input voltage has stabilized.
The MAX6041AEUR+T can sink or source up to 10mA of current. The output impedance is typically around 100 ohms, and the output capacitance is around 10pF.
The MAX6041AEUR+T has a fixed output voltage of 1.8V, but it can be configured for different output voltage levels using external resistors. The available output voltage options range from 1.2V to 5.5V, depending on the external resistor values used.
The MAX6041AEUR+T has a thermal shutdown feature that protects the device from overheating. To ensure reliable operation over temperature, it's recommended to keep the device junction temperature below 125°C. This can be achieved by providing adequate heat sinking, using a thermally conductive PCB material, and minimizing power dissipation.
MAX6041AEUR+T datasheet
by Maxim Integrated Products
