The MAX6302CSA is a high-frequency device, so it's essential to follow good layout practices to minimize noise and ensure proper operation. Place the device close to the power source, use short traces, and avoid vias under the device. Also, ensure that the input and output capacitors are placed close to the device pins.
The input capacitor should be a low-ESR ceramic capacitor with a value between 1µF to 10µF. The output capacitor should be a low-ESR ceramic capacitor with a value between 1µF to 22µF. The capacitor values and types may vary depending on the specific application and output voltage requirements.
The MAX6302CSA can handle input voltages up to 28V, but it's recommended to operate within the specified input voltage range of 4.5V to 24V for optimal performance and reliability.
The output voltage of the MAX6302CSA can be adjusted by using a resistive divider network between the output pin and the ground pin. The output voltage is determined by the ratio of the resistors and the internal reference voltage.
The typical startup time for the MAX6302CSA is around 1ms to 2ms, but this can vary depending on the input voltage, output voltage, and load conditions.
MAX6302CSA datasheet
by Maxim Integrated Products
Findchips
