The recommended layout and placement for the MAX6625PMTT+T involves placing the device close to the battery, using short traces, and minimizing the area of the power and ground planes to reduce noise and EMI. A 4-layer PCB with a solid ground plane is recommended.
To optimize the charging current for your specific battery, you can adjust the resistor values of R1 and R2 in the charging current setting circuit. The recommended values are provided in the datasheet, but you may need to experiment with different values to find the optimal charging current for your battery.
The maximum ambient temperature range for the MAX6625PMTT+T is -40°C to +85°C. However, the device can operate at temperatures above 85°C for short periods of time, but the reliability and lifespan may be affected.
To ensure the MAX6625PMTT+T is properly powered down during shutdown, make sure to connect the SHDN pin to a logic-low signal, and ensure that the input voltage is removed or reduced to a level below the undervoltage lockout (UVLO) threshold.
The recommended input capacitor value is 1uF to 10uF, and the type should be a low-ESR ceramic capacitor, such as an X5R or X7R dielectric capacitor, to minimize voltage ripple and ensure stable operation.
Findchips
Findchips