The recommended PCB layout for the MAX6699UE34+ involves placing the device near the battery, using a solid ground plane, and keeping the input and output traces short and wide to minimize noise and voltage drops.
To ensure accurate voltage monitoring, it's essential to use a high-precision voltage reference, such as the internal reference of the MAX6699UE34+, and to minimize noise and voltage drops on the input lines.
The MAX6699UE34+ can handle a maximum voltage of 36V, but it's recommended to operate it within the specified operating range of 2.7V to 5.5V for optimal performance and reliability.
The overvoltage and undervoltage thresholds of the MAX6699UE34+ can be programmed using external resistors connected to the OVSET and UVSET pins, respectively. The threshold values can be calculated using the formulas provided in the datasheet.
The EN (enable) pin on the MAX6699UE34+ is used to enable or disable the device. When the EN pin is pulled low, the device is in shutdown mode, and when it's pulled high, the device is enabled and operational.
Findchips
Findchips