The recommended layout and placement for the MAX6821RUK+T involves keeping the input and output capacitors close to the device, using short traces, and avoiding vias under the device. A 4-layer PCB with a solid ground plane is recommended. Refer to the Maxim Integrated Products application note AN1991 for more details.
To ensure stability, make sure to follow the recommended component values and layout guidelines. Also, ensure that the input and output capacitors have a low equivalent series resistance (ESR) and are placed close to the device. Additionally, a minimum of 1µF capacitance is recommended at the output.
The MAX6821RUK+T can handle a maximum input voltage of 30V, but it's recommended to operate it within the specified input voltage range of 4.5V to 28V for optimal performance and reliability.
The MAX6821RUK+T is rated for operation up to 125°C, but it's recommended to derate the output current and input voltage as the temperature increases. Refer to the datasheet for more information on thermal derating.
To troubleshoot issues with the MAX6821RUK+T, start by checking the input voltage, output voltage, and output current. Verify that the component values and layout meet the recommended guidelines. Use an oscilloscope to check for oscillations or noise on the output. If the issue persists, contact Maxim Integrated Products' technical support for further assistance.
MAX6821RUK+T datasheet
by Maxim Integrated Products
Findchips
