Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img MAX7421EUA+ datasheet by Maxim Integrated Products

    • 5th-Order, Lowpass, Switched-Capacitor Filters
    • Original
    • Yes
    • Yes
    • Transferred
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    MAX7421EUA+ datasheet preview

    MAX7421EUA+ Frequently Asked Questions (FAQs)

    • The recommended PCB layout for the MAX7421EUA+ involves keeping the input and output traces as short as possible, using a solid ground plane, and placing a 0.1uF bypass capacitor between the VCC and GND pins. Additionally, it's recommended to use a separate analog ground plane for the analog inputs and outputs.
    • To ensure proper power-up and power-down of the MAX7421EUA+, it's recommended to follow a specific power-up sequence. First, apply VCC, then apply the analog input voltage, and finally, apply the digital input voltage. During power-down, reverse this sequence. Additionally, ensure that the power supply has a low noise and ripple to prevent any unwanted behavior.
    • The MAX7421EUA+ has an operating temperature range of -40°C to +125°C. However, it's recommended to operate the device within a temperature range of -20°C to +85°C for optimal performance and reliability.
    • The MAX7421EUA+ has built-in ESD protection, but it's still recommended to follow proper ESD handling procedures during assembly and testing. Use an ESD wrist strap or mat, and ensure that the device is stored in an ESD-safe environment.
    • The recommended input impedance for the MAX7421EUA+ is 1kΩ or higher. This ensures that the input signal is not attenuated and that the device operates within its specified performance range.
    Supplyframe Tracking Pixel