MAX8216ESD+T datasheet by Maxim Integrated Products

MAX8216ESD+T Frequently Asked Questions (FAQs)

• What is the recommended layout and placement for the MAX8216ESD+T to minimize EMI and ensure optimal performance?
  The MAX8216ESD+T should be placed close to the power source, and the input and output capacitors should be placed as close to the device as possible. The device should be oriented to minimize loop area and reduce radiated emissions. A solid ground plane and a low-impedance power supply are also recommended.
• How do I ensure the MAX8216ESD+T is properly bypassed for optimal performance?
  The MAX8216ESD+T requires a minimum of 1uF ceramic capacitor between the VIN pin and GND, and a 10uF electrolytic capacitor between the VOUT pin and GND. Additional bypass capacitors may be required depending on the specific application and layout.
• What is the maximum input voltage that the MAX8216ESD+T can handle?
  The MAX8216ESD+T can handle input voltages up to 28V, but it is recommended to operate within the specified input voltage range of 4.5V to 24V for optimal performance and reliability.
• How do I adjust the output voltage of the MAX8216ESD+T?
  The output voltage of the MAX8216ESD+T can be adjusted by connecting a resistor divider network between the VOUT pin and the ADJ pin. The output voltage can be calculated using the formula: VOUT = 1.25V x (1 + R1/R2), where R1 and R2 are the resistors in the divider network.
• What is the maximum output current that the MAX8216ESD+T can deliver?
  The MAX8216ESD+T can deliver up to 1A of output current, but the maximum output current may be limited by the input voltage, output voltage, and thermal considerations.