Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    MAX8934AETI+T datasheet by Maxim Integrated Products

    • PMIC - Battery Management, Integrated Circuits (ICs), IC BATTERY CHARGER DUAL 28TQFN
    • Original
    • Yes
    • Yes
    • Transferred
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Find it at Findchips.com

    MAX8934AETI+T datasheet preview

    MAX8934AETI+T Frequently Asked Questions (FAQs)

    • The recommended PCB layout for the MAX8934AETI+T involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a separate power plane for the input voltage and to keep the output voltage plane away from the input voltage plane to minimize noise coupling.
    • The selection of input and output capacitors for the MAX8934AETI+T depends on the specific application requirements. In general, it's recommended to use low-ESR capacitors with a capacitance value of 10uF to 22uF for the input capacitor and 10uF to 47uF for the output capacitor. The capacitor voltage rating should be at least 1.5 times the maximum input voltage.
    • The MAX8934AETI+T is rated for operation over a temperature range of -40°C to +125°C. However, the device's performance and reliability may be affected at extreme temperatures, and it's recommended to derate the device's output current and voltage accordingly.
    • The MAX8934AETI+T has a built-in overvoltage protection (OVP) feature that can be enabled by connecting the OVP pin to a voltage source. The OVP threshold is set to 5.5V, but it can be adjusted by connecting a resistor divider network between the OVP pin and the input voltage. When the input voltage exceeds the OVP threshold, the device will shut down to protect itself and the load.
    • Yes, the MAX8934AETI+T is suitable for use in high-reliability and automotive applications. The device is built with high-reliability materials and manufacturing processes, and it's qualified to meet the requirements of the AEC-Q100 automotive standard. However, it's recommended to consult with Maxim Integrated Products' application engineers to ensure that the device meets the specific requirements of the application.
    Price & Stock Powered by Findchips Logo
    Supplyframe Tracking Pixel