The recommended PCB layout for the MAX990ESA+ involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the input capacitors. A 4-layer PCB with a dedicated ground plane is recommended. Additionally, the device should be placed in a quiet area of the board, away from high-frequency signals and switching regulators.
To optimize the performance of the MAX990ESA+ in a noisy environment, use a low-ESR input capacitor, add a ferrite bead or a common-mode choke in series with the input, and use a shielded cable for the input signal. Additionally, consider using a separate analog ground plane and connecting it to the digital ground plane through a single point.
The MAX990ESA+ can handle input voltages up to 42V, but it's recommended to limit the input voltage to 36V to ensure reliable operation and to prevent damage to the device.
The MAX990ESA+ is rated for operation up to 125°C, but its performance may degrade at high temperatures. It's recommended to derate the device's performance by 0.5% per degree Celsius above 85°C. Additionally, ensure that the device is properly heatsinked and that the PCB is designed to handle high temperatures.
To troubleshoot issues with the MAX990ESA+, start by checking the input voltage and current, and ensure that the device is properly powered. Verify that the input signal is within the recommended range and that the output voltage is within the expected range. Use an oscilloscope to check for noise and oscillations, and consult the datasheet and application notes for guidance on troubleshooting common issues.
MAX990ESA+ datasheet
by Maxim Integrated Products
Findchips
