MB95F263KPF-G-SNE2 datasheet by Spansion

MB95F263KPF-G-SNE2 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the MB95F263KPF-G-SNE2?
  The recommended operating voltage range for the MB95F263KPF-G-SNE2 is 2.7V to 3.6V, with a typical voltage of 3.3V.
• How do I handle the HOLD pin during power-up and power-down sequences?
  The HOLD pin should be pulled high during power-up and power-down sequences to prevent unwanted writes to the device. It's recommended to connect a pull-up resistor to the HOLD pin and tie it to VCC.
• What is the maximum clock frequency supported by the MB95F263KPF-G-SNE2?
  The MB95F263KPF-G-SNE2 supports a maximum clock frequency of 33 MHz.
• How do I implement a reliable reset mechanism for the MB95F263KPF-G-SNE2?
  A reliable reset mechanism can be implemented by connecting the RESET pin to a power-on reset circuit or a dedicated reset IC. The RESET pin should be asserted low for at least 10 ns to ensure a proper reset.
• What is the purpose of the WP pin, and how should it be used?
  The WP (Write Protect) pin is used to prevent writes to the device. When the WP pin is asserted low, the device is in write-protect mode, and any write attempts will be ignored. When the WP pin is asserted high, the device is in normal operation mode.