The recommended crystal oscillator frequency for the MB9BF516RPMC-G-JNE2 is 12 MHz, as specified in the datasheet. However, it's essential to note that the oscillator frequency can be adjusted based on the specific application requirements.
The clock settings for the MB9BF516RPMC-G-JNE2 can be configured using the Clock Control Register (CCR). The CCR register allows you to select the clock source, configure the clock frequency, and enable or disable the clock output. Refer to the datasheet for more information on the CCR register and its bit fields.
The MB9BF516RPMC-G-JNE2 has an operating temperature range of -40°C to +85°C. However, it's essential to note that the microcontroller's performance and reliability may be affected at extreme temperatures. Ensure that your design takes into account the operating temperature range and provides adequate thermal management.
The MB9BF516RPMC-G-JNE2 has several low-power modes, including Sleep, Stop, and Hibernate modes. These modes can be enabled using the Power Management Register (PMR). The PMR register allows you to configure the power mode, clock frequency, and wake-up sources. Refer to the datasheet for more information on the PMR register and its bit fields.
The maximum current consumption of the MB9BF516RPMC-G-JNE2 depends on the operating frequency, voltage, and peripherals used. According to the datasheet, the maximum current consumption is approximately 50 mA at 48 MHz operating frequency and 3.3 V supply voltage. However, this value may vary depending on your specific application and design.
