The maximum current rating of the MC33932EK is 2.5A per channel, with a total current limit of 5A for both channels combined.
The MC33932EK can be configured for high-side or low-side switching by connecting the VCC pin to the desired voltage rail and setting the EN pin high or low accordingly. Refer to the application note AN4533 for more details.
The diagnostic pins (nDIA, nDIB) on the MC33932EK are used to monitor the status of the H-bridge outputs. They can be used to detect overcurrent, undervoltage, or overtemperature conditions.
Yes, the MC33932EK can be used for brushless DC motor control. However, it requires an external controller to generate the PWM signals and handle the commutation logic.
The minimum input voltage required for the MC33932EK to operate is 5.5V, although it can operate down to 4.5V with reduced performance.
