MC56F8013MFAE datasheet by Freescale Semiconductor

MC56F8013MFAE Frequently Asked Questions (FAQs)

• What is the maximum operating frequency of the MC56F8013MFAE?
  The maximum operating frequency of the MC56F8013MFAE is 32 MHz, but it can be overclocked to 40 MHz with reduced voltage and temperature ranges.
• How do I configure the clock settings for the MC56F8013MFAE?
  The clock settings for the MC56F8013MFAE can be configured using the Clock Generation Module (CGM) registers. The CGM provides a flexible clock tree that allows the user to select the clock source, divide the clock frequency, and enable/disable clock outputs.
• What is the purpose of the COP (Computer Operating Properly) module in the MC56F8013MFAE?
  The COP module in the MC56F8013MFAE is a watchdog timer that monitors the operation of the microcontroller and resets it if it fails to respond within a specified time period. This helps to prevent the microcontroller from getting stuck in an infinite loop or other abnormal operation.
• How do I use the ADC (Analog-to-Digital Converter) module in the MC56F8013MFAE?
  The ADC module in the MC56F8013MFAE can be used to convert analog signals from sensors or other sources to digital values. The ADC module can be configured to operate in different modes, including single-shot mode, continuous conversion mode, and scan mode. The ADC module also provides features such as automatic channel scanning, analog input multiplexing, and programmable gain amplifiers.
• What is the maximum current that can be sourced/sunk by the GPIO pins of the MC56F8013MFAE?
  The maximum current that can be sourced by the GPIO pins of the MC56F8013MFAE is 25 mA, and the maximum current that can be sunk is 25 mA. However, the total current sourced or sunk by all GPIO pins should not exceed 150 mA.