MC56F8323VFBE datasheet by Freescale Semiconductor

MC56F8323VFBE Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that can be used with the internal oscillator?
  The maximum clock frequency that can be used with the internal oscillator is 32 MHz.
• How do I configure the ADC to convert analog signals from multiple channels?
  To configure the ADC to convert analog signals from multiple channels, you need to use the ADC's scan mode. In this mode, the ADC automatically switches between multiple channels and converts the analog signals. You can configure the ADC scan mode by setting the ADC_SC2 register.
• What is the purpose of the COP (Computer Operating Properly) watchdog timer?
  The COP watchdog timer is used to monitor the operation of the microcontroller and reset it if it fails to respond within a specified time period. This is useful in applications where the microcontroller needs to recover from a fault or error condition.
• How do I use the DMA controller to transfer data between peripherals?
  To use the DMA controller to transfer data between peripherals, you need to configure the DMA channel to transfer data between the source and destination peripherals. You can do this by setting the DMA_SOFF, DMA_SSIZE, and DMA_DADDR registers.
• What is the maximum amount of current that can be sourced or sunk by the GPIO pins?
  The maximum amount of current that can be sourced or sunk by the GPIO pins is 25 mA.