The recommended oscillator crystal frequency for the MC908LJ12CPBE is 3.579545 MHz or 4.0 MHz, depending on the application and clock speed requirements.
The internal clock source can be configured using the Clock Generator Module (CGM) registers. The CGM provides a clock signal to the CPU and peripherals. The configuration involves setting the clock source, clock divider, and clock multiplier values.
The maximum clock speed of the MC908LJ12CPBE is 12 MHz, which is achieved by using an external clock source or by multiplying the internal clock source using the Phase-Locked Loop (PLL) module.
The ADC module can be used by configuring the ADC control registers, selecting the analog input channel, and starting the conversion process. The ADC result can be read from the ADC result registers. The ADC module can operate in various modes, including single-shot, continuous, and scan modes.
The COP module is a watchdog timer that monitors the microcontroller's operation and resets the device if it fails to respond within a specified time period. This ensures that the microcontroller operates properly and prevents it from getting stuck in an infinite loop or other abnormal conditions.
