MK10DN512VLQ10 datasheet by Freescale Semiconductor

MK10DN512VLQ10 Frequently Asked Questions (FAQs)

• What is the maximum operating temperature range for this microcontroller?
  The MK10DN512VLQ10 can operate from -40°C to 105°C (industrial temperature range) and from -40°C to 125°C (extended temperature range) with some limitations.
• How do I configure the clock system for optimal performance and power consumption?
  The clock system can be configured using the Clock Manager (CLKMGR) module. The optimal configuration depends on the specific application requirements, but generally, it's recommended to use the internal clock source (IRC48M) and enable the clock gating feature to reduce power consumption.
• What is the maximum frequency for the USB interface?
  The MK10DN512VLQ10 supports USB 2.0 Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps) modes, but it does not support High-Speed (480 Mbps) mode.
• How do I implement secure boot and secure firmware updates?
  The MK10DN512VLQ10 has a built-in Secure Boot mechanism that uses a boot ROM and a secure flash area to ensure the authenticity and integrity of the firmware. For secure firmware updates, use a secure communication protocol (e.g., HTTPS) and implement a secure firmware update mechanism using the device's cryptographic accelerators (e.g., AES, SHA).
• What are the power consumption characteristics of this microcontroller?
  The power consumption of the MK10DN512VLQ10 depends on the operating frequency, voltage, and peripheral usage. In active mode, the typical current consumption is around 30-40 mA at 100 MHz and 3.3V. In low-power modes (e.g., Wait, Stop), the current consumption can be as low as 10-20 μA.