MK10DN512VMD10 datasheet by Freescale Semiconductor

MK10DN512VMD10 Frequently Asked Questions (FAQs)

• What is the maximum operating frequency of the MK10DN512VMD10?
  The maximum operating frequency of the MK10DN512VMD10 is 100 MHz.
• How do I configure the clock settings for the MK10DN512VMD10?
  The clock settings can be configured using the Clock Manager (CLKMGR) module, which allows you to select the clock source, divider, and multiplier. Refer to the device's reference manual for detailed instructions.
• What is the purpose of the various power modes available on the MK10DN512VMD10?
  The MK10DN512VMD10 has several power modes, including RUN, WAIT, STOP, and VLPS (Very Low Power Stop), which allow you to optimize power consumption based on the application's requirements. RUN mode is the normal operating mode, while WAIT and STOP modes reduce power consumption by shutting down non-essential peripherals. VLPS mode is the lowest power mode, where the device is in a deep sleep state.
• How do I use the DMA (Direct Memory Access) controller on the MK10DN512VMD10?
  The DMA controller on the MK10DN512VMD10 allows you to transfer data between peripherals and memory without CPU intervention. You need to configure the DMA channel, set the transfer parameters, and enable the DMA controller. Refer to the device's reference manual for detailed instructions and examples.
• What is the maximum amount of flash memory that can be used for program storage on the MK10DN512VMD10?
  The MK10DN512VMD10 has 512 KB of flash memory, which can be used for program storage. However, some of this memory is reserved for the bootloader and other system functions, so the actual available program storage space is around 448 KB.