A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the input and output capacitors close to the device and use short, wide traces for the power lines.
To ensure stability, use a minimum output capacitance of 10uF, and ensure that the output capacitor has a low ESR (Equivalent Series Resistance). Also, avoid using ceramic capacitors with high ESL (Equivalent Series Inductance).
The MMPF0100F0AEP can handle a maximum input voltage of 5.5V. Exceeding this voltage may damage the device.
The output voltage of the MMPF0100F0AEP can be calculated using the formula: Vout = 0.8V x (1 + R1/R2), where R1 and R2 are the resistors in the feedback network.
The MMPF0100F0AEP has a thermal derating of 6.4mW/°C above 25°C. This means that the device's power dissipation must be reduced as the temperature increases to prevent overheating.
