The MP6910DZ-LF can handle up to 24V input voltage, but it's recommended to keep it below 20V for optimal performance and reliability.
To ensure stability, make sure to use a minimum of 10uF ceramic capacitor at the output, and keep the output voltage within the recommended range of 0.8V to 5.5V.
The MP6910DZ-LF can provide up to 1.5A of output current, but it's recommended to keep it below 1.2A for optimal performance and thermal management.
The output voltage can be adjusted by using a resistive divider network between the FB pin and the output pin. The recommended resistors are 1kΩ and 2kΩ for a 3.3V output, but you can calculate the values based on your desired output voltage.
The EN (Enable) pin is used to turn the regulator on or off. When the EN pin is pulled high, the regulator is enabled, and when it's pulled low, the regulator is disabled.
