The MP8904DD-LF-Z can handle input voltages up to 24V, but it's recommended to operate within the specified input voltage range of 4.5V to 18V for optimal performance and reliability.
To ensure the stability of the output voltage, it's essential to follow the recommended layout and component selection guidelines provided in the datasheet, including the use of a suitable output capacitor and a stable input voltage.
The MP8904DD-LF-Z can provide a maximum output current of 2A, but it's recommended to operate within the specified output current range of 0.1A to 1.5A for optimal performance and reliability.
The output voltage of the MP8904DD-LF-Z can be adjusted by using an external resistor divider network connected to the FB pin, as described in the datasheet.
The EN (Enable) pin is used to enable or disable the regulator. When the EN pin is pulled high, the regulator is enabled, and when it's pulled low, the regulator is disabled.
MP8904DD-LF-Z datasheet
by Monolithic Power Systems
