MSP430F2410TPMR datasheet by Texas Instruments

MSP430F2410TPMR Frequently Asked Questions (FAQs)

• What is the maximum clock frequency of the MSP430F2410TPMR?
  The maximum clock frequency of the MSP430F2410TPMR is 16 MHz.
• How do I configure the MSP430F2410TPMR for low-power operation?
  To configure the MSP430F2410TPMR for low-power operation, set the CPUOFF bit in the SR register to 1, and use the LPMx bits in the Status Register to select the desired low-power mode (LPM0, LPM1, LPM2, LPM3, or LPM4).
• What is the purpose of the RST/NMI pin on the MSP430F2410TPMR?
  The RST/NMI pin is a dual-function pin that can be used as either a reset input (RST) or a non-maskable interrupt (NMI) input. When configured as a reset input, it can be used to reset the device. When configured as an NMI input, it can be used to generate an interrupt that cannot be masked by the CPU.
• How do I use the watchdog timer on the MSP430F2410TPMR?
  To use the watchdog timer on the MSP430F2410TPMR, configure the WDTCTL register to enable the watchdog timer and set the timeout period. The watchdog timer will then generate a reset if the timer is not reset before the timeout period expires.
• What is the purpose of the JTAG pins on the MSP430F2410TPMR?
  The JTAG pins (TCK, TMS, TDI, and TDO) are used for debugging and programming the device using a JTAG interface. They allow for real-time debugging and programming of the device using a JTAG debugger or programmer.