MSP430F2410TRGCR datasheet by Texas Instruments

MSP430F2410TRGCR Frequently Asked Questions (FAQs)

• What is the maximum clock frequency of the MSP430F2410TRGCR?
  The maximum clock frequency of the MSP430F2410TRGCR is 16 MHz.
• How do I configure the MSP430F2410TRGCR to use an external crystal oscillator?
  To configure the MSP430F2410TRGCR to use an external crystal oscillator, connect the crystal to the XIN and XOUT pins, and set the FLLUNLOCK bit in the FLL_CTL0 register to 1. Then, set the XT2OFF bit in the SYSCTL_CTL0 register to 0 to enable the external crystal oscillator.
• What is the maximum current consumption of the MSP430F2410TRGCR?
  The maximum current consumption of the MSP430F2410TRGCR is approximately 2.1 mA at 16 MHz and 3.3V supply voltage.
• How do I use the built-in UART module on the MSP430F2410TRGCR?
  To use the built-in UART module on the MSP430F2410TRGCR, configure the UART module by setting the UARTCTL register, and then use the UARTTXBUF and UARTRXBUF registers to transmit and receive data.
• Can I use the MSP430F2410TRGCR with a 5V power supply?
  No, the MSP430F2410TRGCR is not 5V tolerant and should only be used with a power supply voltage between 1.8V and 3.6V.