The maximum operating temperature range for the MSP430F417IRTDR is -40°C to 85°C, as specified in the datasheet. However, it's recommended to operate the device within the recommended operating temperature range of -40°C to 70°C for optimal performance and reliability.
To configure the MSP430F417IRTDR for low-power operation, you can use the device's power modes, such as LPM3 or LPM4, which can reduce power consumption to as low as 1.1 μA. You can also use the device's clock system to reduce the clock frequency, disable unused peripherals, and use the brown-out reset (BOR) feature to reduce power consumption.
The maximum clock frequency for the MSP430F417IRTDR is 16 MHz, which can be achieved using an external crystal oscillator or a high-frequency internal digitally controlled oscillator (DCO). However, the device can also operate at lower clock frequencies, such as 1 MHz or 4 MHz, to reduce power consumption.
The MSP430F417IRTDR can be programmed using the Texas Instruments Code Composer Studio (CCS) integrated development environment (IDE) or the IAR Embedded Workbench. You can also use the MSP430F417IRTDR's built-in bootloader to program the device using a serial interface, such as UART or SPI.
The MSP430F417IRTDR has 128 KB of flash memory, which can be used to store program code, data, and constants. The device also has 4 KB of RAM, which can be used to store data and program variables.
MSP430F417IRTDR datasheet
by Texas Instruments
Findchips
