The maximum operating temperature range for the MSP430F5152IYFFT is -40°C to 85°C, as specified in the datasheet. However, it's essential to note that the device can operate at a reduced frequency and voltage at higher temperatures.
To configure the MSP430F5152IYFFT for low-power operation, you can use the Power Management Module (PMM) to control the power modes. You can also use the Low Power Mode 3 (LPM3) or Low Power Mode 4 (LPM4) to reduce power consumption. Additionally, you can disable unused peripherals and use the clock system to reduce power consumption.
The maximum clock frequency for the MSP430F5152IYFFT is 25 MHz, as specified in the datasheet. However, the device can operate at a lower frequency to reduce power consumption.
The MSP430F5152IYFFT can be programmed using the Spy-Bi-Wire (SBW) interface or the Joint Test Action Group (JTAG) interface. You can use the Texas Instruments Code Composer Studio (CCS) or IAR Embedded Workbench to develop and debug your code.
The MSP430F5152IYFFT has 32 KB of flash memory, which can be used to store program code and data.
MSP430F5152IYFFT datasheet
by Texas Instruments
