Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img MW22B-10-1K datasheet by ETI Systems

    • Over 600 obsolete distributor catalogs now available on the Datasheet Archive - Potentiome... ter, Wirewound, 10 Turn, 2 Watt, 1K Ohms more
    • Scan
    • Yes
    • Yes
    • Contact Manufacturer
    • EAR99
    • Powered by Findchips Logo Findchips

    MW22B-10-1K datasheet preview

    MW22B-10-1K Frequently Asked Questions (FAQs)

    • A symmetrical layout with a solid ground plane and minimal signal trace length is recommended. Keep the input and output traces separate and avoid crossing them to minimize electromagnetic interference.
    • Provide adequate heat sinking and ensure good airflow around the component. Avoid placing heat-generating components nearby, and consider using a thermal interface material to improve heat transfer.
    • The recommended input voltage range is 10-15V, with a typical operating voltage of 12V. Operating outside this range may affect performance and reliability.
    • Use a voltage regulator or overvoltage protection circuit to prevent voltage spikes. Add a current-limiting resistor or fuse to prevent overcurrent conditions. Consider using a surge protection device for added protection.
    • The maximum power dissipation is 10W. Ensure the component is properly heat-sunk and operated within its specified temperature range to prevent overheating.
    Supplyframe Tracking Pixel