Murata recommends a 2-layer PCB with a solid ground plane on the bottom layer and a thermal relief pattern on the top layer to ensure optimal thermal performance.
Use a soldering iron with a temperature of 250°C to 270°C, and ensure the soldering time is within 3 seconds to 5 seconds. Also, use a solder with a melting point of 180°C to 220°C.
The maximum allowed voltage derating for the NMJ0505SC is 80% of the nominal input voltage. Exceeding this limit may affect the module's reliability and performance.
Yes, the NMJ0505SC is designed to operate in a humid environment, but it's recommended to follow the IPC-J-STD-001 standard for moisture sensitivity level (MSL) classification. Ensure the module is stored and handled according to the recommended MSL rating.
Murata recommends using a 10uF to 22uF ceramic capacitor with a voltage rating of 50V or higher, placed as close as possible to the input pins of the module.
