Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img PCA9532D,112 datasheet by NXP Semiconductors

    • 16-bit I<sup>2</sup>C LED dimmer - # of Addresses: 8 ; I2C-bus: 400 kHz; Max Sink Current per bit: 25 mA; Max Sink Current, per package: 200 mA; Number of bits: 16 ; Operating temperature: -40~85 Cel; Operating voltage: 2.3~5.5 VDC; PWMs: 2 (160 Hz to 1.6 sec) ; Reset input pin: yes; Package: SOT137-1 (SO24); Container: Tube
    • Original
    • Yes
    • Unknown
    • Obsolete
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
      PCA9532D,118

    PCA9532D,112 datasheet preview
    Download Datasheet

    PCA9532D,112 Frequently Asked Questions (FAQs)

    • The PCA9532D,112 can support I2C bus frequencies up to 400 kHz.
    • To use an external pull-up resistor, connect the resistor between the SCL/SDA pins and the VCC pin. The recommended value is 1 kΩ to 10 kΩ.
    • The PCA9532D,112 can sink or source up to 25 mA on each output pin.
    • The PCA9532D,112 can be reset by pulling the RESET pin low for at least 1 ms. This will reset the device to its default state.
    • Yes, the PCA9532D,112 can be used as a level translator. It can translate voltage levels between 1.8 V, 2.5 V, 3.3 V, and 5 V.

    Newly Added Datasheets | Privacy Policy | Digital Services Act | Contact Us | About Us

    Copyright © 2025.

    Supplyframe Tracking Pixel