PCF8576CT/1,112 datasheet by NXP Semiconductors

PCF8576CT/1,112 Frequently Asked Questions (FAQs)

• What is the maximum frequency of the I2C bus that the PCF8576CT/1,112 can support?
  The PCF8576CT/1,112 can support I2C bus frequencies up to 400 kHz.
• How do I handle the reset pin (RST) of the PCF8576CT/1,112?
  The reset pin (RST) is an active-low input that resets the device when pulled low. It's recommended to tie the RST pin to VCC through a 1 kΩ resistor to ensure proper operation.
• What is the maximum current that the PCF8576CT/1,112 can sink or source on its I/O pins?
  The PCF8576CT/1,112 can sink or source up to 25 mA of current on its I/O pins.
• How do I configure the PCF8576CT/1,112 for input or output mode?
  The PCF8576CT/1,112 has a register-based configuration. You need to write to the configuration register (address 0x00) to set the I/O pins as inputs or outputs.
• What is the purpose of the internal pull-up resistors on the I/O pins of the PCF8576CT/1,112?
  The internal pull-up resistors on the I/O pins of the PCF8576CT/1,112 are used to pull the pins high when they are configured as inputs. This helps to prevent floating inputs and ensures proper operation.