PCI1520IZHK datasheet by Texas Instruments

PCI1520IZHK Frequently Asked Questions (FAQs)

• What is the recommended operating temperature range for the PCI1520IZHK?
  The recommended operating temperature range for the PCI1520IZHK is -40°C to 85°C, with a junction temperature of up to 125°C.
• How do I configure the PCI1520IZHK for PCIe Gen1, Gen2, or Gen3?
  The PCI1520IZHK can be configured for different PCIe generations using the CFG_RATE pin. For Gen1, tie CFG_RATE to GND. For Gen2, tie CFG_RATE to VCC. For Gen3, leave CFG_RATE floating.
• What is the maximum power consumption of the PCI1520IZHK?
  The maximum power consumption of the PCI1520IZHK is 1.5 W, with a typical power consumption of 1.2 W.
• How do I implement spread spectrum clocking (SSC) with the PCI1520IZHK?
  To implement SSC, connect the SSC_EN pin to VCC and adjust the SSC_FREQ pin to set the desired spread spectrum frequency.
• What is the recommended layout and routing for the PCI1520IZHK?
  Texas Instruments recommends following the PCIe specification for layout and routing, with careful attention to signal integrity, impedance matching, and decoupling.