Although the datasheet specifies an input voltage range of 3.5V to 6.0V, ABLIC Inc. recommends that the maximum input voltage should not exceed 6.5V to ensure reliable operation and prevent damage to the device.
To ensure stable output voltage, it's essential to follow the recommended PCB layout and component placement guidelines, including the use of a 1μF or larger output capacitor with a low ESR value. Additionally, the input capacitor should be placed as close to the VIN pin as possible.
The S-1011A60-M6T1U4 can maintain its output voltage down to an input voltage of around 3.2V, but the output voltage may start to drop slightly below 3.2V. For guaranteed operation, it's recommended to keep the input voltage above 3.5V.
The S-1011A60-M6T1U4 is rated for operation up to 125°C, but its performance and reliability may degrade at higher temperatures. It's essential to follow the recommended operating conditions and consider the thermal design of the system to ensure reliable operation.
The power dissipation of the S-1011A60-M6T1U4 can be calculated using the formula: Pd = (VIN - VOUT) x IOUT. It's essential to consider the power dissipation and thermal design of the system to ensure reliable operation and prevent overheating.
S-1011A60-M6T1U4 datasheet
by ABLIC Inc.
