The recommended operating voltage range for the S-24C04DI-J8T1U5 is 1.7V to 5.5V, as specified in the datasheet. However, it's essential to note that the device can tolerate a voltage range of 1.5V to 6.0V for a short duration, but prolonged operation outside the recommended range may affect its performance and lifespan.
The S-24C04DI-J8T1U5 has an internal POR and BOR circuitry. The POR function resets the device when the power supply voltage rises above the POR threshold (typically 1.7V). The BOR function resets the device when the power supply voltage falls below the BOR threshold (typically 1.5V). To handle these functions, ensure that your power supply design provides a stable voltage within the recommended operating range, and consider adding external circuitry to filter out noise and voltage spikes.
The S-24C04DI-J8T1U5 supports a maximum clock frequency of 400 kHz, as specified in the datasheet. However, it's essential to note that the actual clock frequency may vary depending on the specific application, operating voltage, and temperature conditions.
To ensure data retention in the S-24C04DI-J8T1U5, it's essential to follow proper power-down and power-up sequences. When powering down, ensure that the VCC supply voltage is reduced to 0V or a voltage below the BOR threshold. During power-down, the device will automatically enter a low-power standby mode, and the data will be retained. When powering up, ensure that the VCC supply voltage rises above the POR threshold to allow the device to properly initialize and retain data.
The typical write endurance of the S-24C04DI-J8T1U5 is 1 million write cycles, as specified in the datasheet. However, this value may vary depending on the specific application, operating conditions, and usage patterns. It's essential to consider the write endurance when designing your application to ensure reliable data storage and retrieval.
S-24C04DI-J8T1U5 datasheet
by ABLIC Inc.
Findchips
Findchips