The recommended operating voltage range is 2.7V to 5.5V, as specified in the datasheet. However, it's essential to note that the device can tolerate a voltage range of 2.3V to 6.0V for a short duration, but prolonged operation outside the recommended range may affect its performance and lifespan.
To ensure data integrity, it's crucial to follow the power-down sequence recommended in the datasheet. The device has a built-in power-down detection circuit that automatically switches to a low-power mode when the supply voltage falls below a certain threshold. Additionally, consider implementing external circuitry to detect power-down conditions and initiate a controlled shutdown sequence.
The maximum clock frequency supported by the S-24C64CI-T8T1U3 is 400 kHz. However, it's essential to note that the device can operate at higher frequencies, but with reduced reliability and potential data corruption. It's recommended to follow the clock frequency guidelines specified in the datasheet to ensure reliable operation.
The S-24C64CI-T8T1U3 is rated for operation up to 85°C (T grade). While it can tolerate higher temperatures for short durations, prolonged exposure to temperatures above 85°C may affect its performance, reliability, and lifespan. If your application requires operation in high-temperature environments, consider using a device with a higher temperature rating or implementing additional cooling measures.
The hold time requirement for the S-24C64CI-T8T1U3 is 0.6 μs minimum. To ensure reliable operation, it's essential to ensure that the clock signal is stable and meets the hold time requirement during read and write operations. You can achieve this by using a clock signal with a sufficient rise and fall time, and by adding external circuitry to ensure the hold time requirement is met.
S-24C64CI-T8T1U3 datasheet
by ABLIC Inc.
Findchips
Findchips