The S25FL032P0XMFI000 has a minimum of 100,000 erase cycles per sector, and a minimum of 10,000 erase cycles per block.
The HOLD# pin should be driven high during low-power modes to prevent the device from responding to external inputs. This ensures that the device remains in a low-power state.
The recommended method is to use the RY/BY# pin, which goes low during a program or erase operation and returns high when the operation is complete. Alternatively, you can use the ENDOFOP command to poll the device's status register.
The WP# pin should be driven high during write operations to enable writing to the device. If the WP# pin is driven low, the device will be write-protected and no writes will be allowed.
The S25FL032P0XMFI000 has a maximum operating frequency of 104 MHz.
S25FL032P0XMFI000 datasheet
by Spansion
