S25FL132K0XMFB010 datasheet by Cypress Semiconductor

S25FL132K0XMFB010 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the S25FL132K0XMFB010?
  The recommended operating voltage range for the S25FL132K0XMFB010 is 2.7V to 3.6V, with a typical voltage of 3.3V.
• How do I handle the hold pin (HOLD#) during power-up and power-down sequences?
  The hold pin (HOLD#) should be pulled high during power-up and power-down sequences to prevent any unwanted commands from being executed.
• What is the purpose of the WP# pin, and how should it be used?
  The WP# pin is a write-protect pin that prevents writes to the status register and the memory array. It should be pulled high to enable writes and pulled low to disable writes.
• How do I determine the optimal clock frequency for my application?
  The optimal clock frequency depends on the specific application requirements. The S25FL132K0XMFB010 supports clock frequencies up to 104 MHz, but the actual frequency used should be determined based on factors such as power consumption, noise tolerance, and system performance.
• What is the difference between the S25FL132K0XMFB010 and other similar flash memory devices from Cypress Semiconductor?
  The S25FL132K0XMFB010 is a 132 Mbit (16 Mbyte) flash memory device with a x8 or x16 bus width, whereas other similar devices may have different densities, bus widths, or features such as Quad SPI or QSPI interfaces.