The S25FS128SAGMFB103 can operate from -40°C to +85°C, with a storage temperature range of -65°C to +150°C.
The HOLD# pin should be pulled high during power-up and power-down to prevent any unwanted commands from being executed. It's recommended to tie HOLD# to VCC through a resistor to ensure it's high during power-up and power-down.
The S25FS128SAGMFB103 can operate at clock frequencies up to 104 MHz. However, it's recommended to use a clock frequency of 50 MHz or lower to ensure reliable operation and minimize power consumption.
The WP# pin should be pulled high during normal operation to allow write and erase operations. If WP# is pulled low, the device will be in a protected state, and write and erase operations will be blocked.
The DPD mode is a low-power state that reduces the device's power consumption to a minimum. It's useful for battery-powered applications where power consumption needs to be minimized during idle periods.
