S29AL008J70TFI010 datasheet by Spansion

S29AL008J70TFI010 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for this flash memory?
  The recommended operating voltage range for the S29AL008J70TFI010 is 2.7V to 3.6V.
• How do I handle the hold signal (HOLD#) during read and write operations?
  The HOLD# signal should be asserted low to pause the current operation and de-asserted high to resume the operation. During this time, the address and data buses are tri-stated.
• What is the purpose of the write protect (WP#) signal?
  The WP# signal is used to prevent accidental writes to the device. When WP# is asserted low, the device is write-protected, and any write operations will be ignored.
• How do I perform a sector erase operation?
  To perform a sector erase operation, the device must be in the erase suspend mode. Then, the sector address must be written to the device, followed by the erase command (60h). The device will then erase the specified sector.
• What is the maximum number of erase cycles for this device?
  The S29AL008J70TFI010 has a minimum of 100,000 erase cycles per sector, and a minimum of 10,000 write cycles per page.